Silarius SIL-B48M3POE1G500 48 Ports 10/100/1000Mbps Gigabit Layer3 Managed PoE+ switch with 4 Ports 10G SFP+ Uplink, 1 Console, 6KV surge protection, 500W, rack mount installation Silarius Outlet Sale

Key Features:

Ports: Provide 48*10/100/1000Mbps PoE+ ports with 4 Ports 1/10G SFP+ Uplink，1USB，1Console
PoE Standard: IEEE802.3af/at Power over Ethernet (PoE+) Compliant
Self-adaption: RJ45 port supports 1000Mbps Auto MDI/MDIX
Fiber Port: 4 Ports 1/10G SFP+ Uplink
Wide Application: Designed for Wifi AP and IP Security camera.VoIP etc
Managed: Support remote web managed,VLAN and storm control and IPV6 management etc.
Layer3 Features, Static route，RIP，OSPF etc.

Surge protection: Protect the device from lighting surges and others electrical hazards
Installation: Rack mount with easy installation.

Introducing a new Gigabit Managed POE Switch for future-proof deployments

With layer 3 managed Gigabit Ethernet Switch, It provides IPv6/IPv4 management and built-in L2/L4 Gigabit Switching engine, and supports high-speed transmission of surveillance images and videos.
The SIL-B48M3POE1G500 Smart PoE+ Switch with 48 1000BASE-T PoE+ ports and four 10G SFP+ slots,It delivers advanced management features with an 256Gbps switching capacity. The SIL-B48M3POE1G500 is equipped with 1000BASE-T PoE+ ports that provide higher gigabit speeds capable of up to 1000Mbps over existing Cat5e or better cabling. This switch provides eight PoE+ connections with a Max power budget of 500W, and supplies up to 30W of power per port for devices such as wireless access points, PTZ IP cameras, and VoIP telephony systems.

1000Mbps Capability for Diversified Bandwidth Applications

With the terminal access rates of 802.11ac wireless APs reaching as high as 1Gbps, 100M ports has been unable to satisfy the demand. Supporting 1Gbps capability and 802.3af/at POE output, the SIL-B48M3POE1G500 can deliver not only data to 802.11ac wireless APs, but also power to other powered devices such as APs and IP cameras.

10 Gbps SFP Ports Optimize Network Performance

The SIL-B48M3POE1G500 provides greater bandwidth and powerful processing capacity. It offers a maximum 40Gbps uplink bandwidth through the Four 10Gbps SFP+ ports. In addition, the administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.

Cost-effective IPv6 Managed Gigabit Ethernet Switch Solution

With layer 3 managed Gigabit Ethernet Switch, It provides IPv6/IPv4 management and built-in L2/L4 Gigabit Switching engine, and supports high-speed transmission of surveillance images and videos.

Surge Protection Design

Reaching 6KV surge protection, the Ethernet ports owns the capacity to keep the Ethernet Switch from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.

 

Model	SIL-B48M3POE1G500
Hardware Specifications
Connector	48* 10/100/1000BASE-T RJ45 auto MDI/MDIX ports 4* 10G Base-X SFP+ Slots Uplink 1 Console port，1USB
Uplink port	4 10G Base-X SFP+ Slots
LED Display	Power Indicator: PWR(green). Network Indicator: Link(yellow) POE: Orange SFP: Green
Thermal Fan	Fanless Design
Network Standard	IIEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ab 1000BASE-T IEEE 802.3ae 10Gb/s Ethernet IEEE 802.3x flow control and back pressure IEEE802.3az EEE
Switch Architecture	Store and Forward
Transmission model	IEEE802.3X full-duplex and Backpressure half-duplex
Switch Performance	Backplane bandwidth	256Gbps
	Packet forwarding rate	232Mpps
	MAC address	32k
Power requirement	AC100-240V 50/60Hz
ESD Protection	6KV ESD
Dimension	440mm x 290mm x 44.5mm(17.32in x 11.42in x 1.75in)
Weight	6kg
Environment	Operating temperature: -20℃~55℃，operating humidity: 5％~95％ Storage temperature: -40℃~75℃，storage humidity: 5％~95％
Safety	FCC Part15 Class A,CE.RoHs

 

Power over Ethernet (PoE) Specifications
PoE Standard
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE

PoE Supply Type

1/2(+), 3/6(-) End-span

PoE Power Output
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)

PoE Power budget:  500W

Layer 3 Functions
Port Mirroring
TX / RX / both Many-to-1 monitor Vlan 802.1Q tagged-based

VLAN:  Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling Voice VLAN;Protocol VLAN;Private VLAN (Protected port),GVRP

Link Aggregation
IEEE 802.3ad LACP and static trunk
Supports 8 groups of 8-port trunk Spanning Tree Protocol STP, IEEE 802.1D

Spanning Tree Protocol: RSTP, IEEE 802.1w Rapid Spanning Tree Protocol MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
IGMP Snooping
IGMP (v2/v3) snooping；IGMP querier；Up to 256 multicast groups

MLD Snooping: MLD (v1/v2) snooping, up to 256 multicast groups
Access Control List
IPv4/IPv6 IP-based ACL / MAC-based ACL

PoE Management:

Open or close port Standard POE scheduling management Power and current display Automatic restarting function of equipment dead machine Timing Support IP bindings restarting

Layer 3 Features:

IPV4/IPV6 VRRP, the maximum group is 255
IPV4/IPV6 static route/default route supports up to 128 entries
IPV4 dynamic routing, RIPv1/v2, OSPFv2, 4000 routing entries
IPV6 dynamic routing OSPFv3, RIPng, IPV6 management, 1000 routing entries
L3 network management function, IPV4/IPV6 dual-stack management
Layer 3 routing and forwarding, support communication between different network segments and different VLANs

QoS :

8 mapping ID to 8 level priority queues — Port number — 802.1p priority — 802.1Q VLAN tag — DSCP field in IP packet Traffic classification based, strict priority and WRR

Security:
IEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS / TACACS+ user access authentication；IP-MAC port binding；MAC filtering；
Static MAC address；DHCP Snooping and DHCP Option82；STP BPDU guard,
BPDU filtering and BPDU forwarding；DoS attack prevention；ARP inspection

Management Function
Basic Management Interfaces
Web browser / Telnet / SNMP v1, v2c, V3 Firmware upgrade by HTTP / TFTP protocol through Ethernet network Remote / Local Syslog,System log,LLDP protocol ,SNTP

Secure Management Interfaces: SSH, SSL, SNMP

SNMP MIBs
RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB

DOWNLOAD SPEC SHEET HERE